Replacing trailer axles

Working on a 5 ton equipment trailer with hydraulic surge brakes:
0:00 Replacing trailer lounge master brake cylinder assembly
4:01 1 year + remove axles, brakes, suspension
13:35 install new axles, suspension, brakes
32:35 Demonstrate problem with trailer not going in reverse
37:16 install block off valve to fix reverse problem
There some grey dodge footage in here, and some excavation footage.

Headlamp: amzn.to/32xEREd

Σχόλια

  • Gene Goodman
    Gene GoodmanΠριν 3 ημέρες

    I had a camper with a hydraulic brake system and it just had a bolt to insert to lock the surge from working. Stay safe

  • Roberta Christeen
    Roberta ChristeenΠριν 3 ημέρες

    awsome job

  • Squish
    SquishΠριν 5 ημέρες

    Majority of the country doesn't use salt on their roads, im in Colorado and they stopped using salt years ago

  • Stephen Cox
    Stephen CoxΠριν 5 ημέρες

    where u get all the money for all these upgrades

  • Jonathan Couch
    Jonathan CouchΠριν 6 ημέρες

    That's sweet took shipping containers and made a shop

  • wesson Collins
    wesson CollinsΠριν 7 ημέρες

    Have you checked the transmissions

  • AnthonyCarinci
    AnthonyCarinciΠριν 9 ημέρες

    1 time use fasteners

  • 1995dresser
    1995dresserΠριν 9 ημέρες

    38:16 nice tester where did you get it ?

  • Fishing Dfdubb
    Fishing DfdubbΠριν 9 ημέρες

    35:10 OMG! I fell outta my chair that was HILARIOUS!🤣🔥👊

  • Fishing Dfdubb
    Fishing DfdubbΠριν 9 ημέρες

    29:10 Gotta loves POPS!!! How'd you lift those axles? Andrew.. I picked em up... 🤣🤣🤣🤣🤣

  • Fishing Dfdubb
    Fishing DfdubbΠριν 9 ημέρες

    20:00 🤣🤣🤣🤣🤣 ole Andrew with unreasonable expectation for vehicles! 👊👊👊🔥🔥

  • 2088bob konarski
    2088bob konarskiΠριν 10 ημέρες

    a little grease might help alot you dork

  • Colin Griffin
    Colin GriffinΠριν 10 ημέρες

    Its common sense dude. If they made stuff to last they can't sell u parts

  • m0nk3yl0v3r
    m0nk3yl0v3rΠριν 11 ημέρες

    As a long time subscriber Im kinda sad to see Grey Truck on the way out...

  • Obeebe Mahasee
    Obeebe MahaseeΠριν 11 ημέρες

    Been here since 250k waiting for 1 mil

  • You Cant HandleTruth
    You Cant HandleTruthΠριν 12 ημέρες

    ANDY, THOSE NEW AXLES LOOK BOWED...THE HIGH PART OF THE CENTER BOW GOES TO THE TOP SO THE WHEELS UNDER LOAD SETTLE STRAIGHT VERTICAL, NOT LEANED IN AT THE TOP ?

  • Roger Goodey
    Roger GoodeyΠριν 12 ημέρες

    A.C. Is so gifted in every tiny thing he does. Anything is within his capabilities and may I say,ANDREW FOR THE WHITE HOUSE .. Andrew your an inspiration to everybody on this planet and beyond. Are you sure your not English. Good luck to you and America buddy, from the Island UK. ROGER 🇬🇧

  • Roberto Moers
    Roberto MoersΠριν 12 ημέρες

    Respect.

  • I-K
    I-KΠριν 14 ημέρες

    So impressed by you Andrew and your skills.. and Cody the Inspector.

  • Mathieu Pivin
    Mathieu PivinΠριν 16 ημέρες

    Seriously think a Milwaukee impact would be a lot better. No hate but desalt isn’t for having great but busting impacts. Good job tho!

  • Nick F
    Nick FΠριν 16 ημέρες

    The thing i love most about his channel is he shows every single step

  • Terry Young
    Terry YoungΠριν 16 ημέρες

    Sh thastwhstx get dc th fans ex txx C s✅🍒❤️🥰🤷‍♀️🤫😍😋🤫🤞🏻hx

  • Benjamin Barnhill
    Benjamin BarnhillΠριν 16 ημέρες

    I would still pay $1,000 for that gray truck

  • Robert Sutphen
    Robert SutphenΠριν 16 ημέρες

    Excellent video. Excellent effort. Excellent mechanic!

  • Krimbo Slice
    Krimbo SliceΠριν 17 ημέρες

    what is that orange tool you're using ??

  • nob mik
    nob mikΠριν 17 ημέρες

    Its' GRET

  • Alex Ruzgus
    Alex RuzgusΠριν 17 ημέρες

    Why would you watch Master Chef when Andrew is far more entertaining without the BS. 48 minutes and 29 seconds of pure entertainment. Not sure if people realize the amount of work that goes into filming every single aspect of what he is doing and then editing it all; it's just mind blowing. Well done Andrew.

  • Creepy Cooter
    Creepy CooterΠριν 18 ημέρες

    I wish you could make and sell you’re own cars, i would 100% buy

  • Brian Shelley
    Brian ShelleyΠριν 19 ημέρες

    The new creeper half way through the video was the real champion.

  • World Wide United
    World Wide UnitedΠριν 19 ημέρες

    Like the channel man. Os nice seeiny someone who can do anything

  • Garbo
    GarboΠριν 20 ημέρες

    Love the videos man wish there was more to watch 👍

  • Dan d
    Dan dΠριν 21 ημέρα

    38:00 connect that directly to the reverse lights ,no switch nedeed ;)

  • Jakeo26
    Jakeo26Πριν 22 ημέρες

    I appreciate the fact that you tried every bolt with a wrench of some sort before bringing out the demo grinder. Bravo.

  • Chris Smith
    Chris SmithΠριν 22 ημέρες

    You should put copper coat in those brake adjustors ! 🤗🤗🤗

  • Julian Mendoza
    Julian MendozaΠριν 22 ημέρες

    How many time has this trailer gotten new brake lines. First when he refurbished it. Second when he under coated it. And now the third time with the new axles.

  • Robert Densmore
    Robert DensmoreΠριν 23 ημέρες

    You can have a rock concert

  • Leaky Waders
    Leaky WadersΠριν 23 ημέρες

    Wait a minute: Andrew is that you? Ear protection, safety glasses and leather gloves? I love it when I see you taking care of your ears, eyes and hands. Way to go brother!

  • Nicklasbns Østerberg
    Nicklasbns ØsterbergΠριν 23 ημέρες

    "i should unhook those break lines first..." "you know what? lets get new break lines" this guy is so great 7:00

  • Justin Good
    Justin GoodΠριν 24 ημέρες

    Andrew, you need a Milwaukee M18 fuel impact. They can remove almost anything!

  • James Breault
    James BreaultΠριν 24 ημέρες

    Wishful thinking on things lasting 50 yrs

  • kid Rogers
    kid RogersΠριν 25 ημέρες

    I love it "ahh you know what imma get new brake lines" "ahh you know what imma cut it" what a guy

  • Finn ice
    Finn iceΠριν 25 ημέρες

    Yeah see I wouldn’t be able to film myself working it would just be constant profanity beeps...

  • Phillip Coiner
    Phillip CoinerΠριν 25 ημέρες

    I agree with you on the brake theory. The adjusters are supposed to automatically adjust when you hit the brakes whilst backing up but as you pointed out the adjuster nut thingy always rusts and sticks together. Maybe some high temp anti seize would help but the real solution is disc brakes......you have a real flare for brake lines! If you stick the hose in a clear bottle of fluid you can pump the brakes till no bubbles come out you don't get fluid on the floor and you can bleed em by yourself. What ever you do don't ever over load your trailer.....bah ha ha ha!

  • Pedro Sardinas
    Pedro SardinasΠριν 26 ημέρες

    The eight newsprint socioeconomically count because stocking architecturally thaw anenst a open client. giant, general gentle dancer

  • Adam
    AdamΠριν 26 ημέρες

    What is in your mouth? 14:00

  • Goo Glesuckz
    Goo GlesuckzΠριν 27 ημέρες

    "Hey Cody, you doin' a *LAB* inspection?" laughed so hard at this lmao.

  • Christopher Vohs
    Christopher VohsΠριν 27 ημέρες

    How is Levi? Didn't watch long enough before commenting. Good to see him. Keep up the great content.

  • Terry Barrett
    Terry BarrettΠριν 27 ημέρες

    THAT GRAY TRUCK IS READY FOR THE NEXT "MAD MAX" MOVIE.

  • Jarek A
    Jarek AΠριν 28 ημέρες

    Should you cover switch stick before hit in by your knee, it can be very painfull ;) additional problem is you can switch it accidentialy and don't know about it and got in trouble.

  • my surly trucker
    my surly truckerΠριν 29 ημέρες

    Nice to see your dad with you mate.

  • Gerald Koth
    Gerald KothΠριν 29 ημέρες

    I put the grease in a heavy plastic freezer zip top bag. Throw a bearing in and squeeze grease into it with no mess and no misses. One bearing at a time with some grease fill in the bag for each bearing. My trailer has electric drum brakes so I get the self adjusting type. There is a lockout for backing with surge brakes.

  • MegaDirtyberty
    MegaDirtybertyΠριν μήνα

    Did you know in New Zealand you can build your own trailer and register it. No buying expensive trailers there.

  • SlimBrooklyn
    SlimBrooklynΠριν μήνα

    Nothing but RESPECT Sir. Greetings from Brooklyn greenpoint 🇵🇱👍

  • CMDR SVT
    CMDR SVTΠριν μήνα

    15 ads / 50 mins = 1 ad every 3 minutes. Fuck that shit, thank god for whoever created Adblock

  • Matthew Allen
    Matthew AllenΠριν μήνα

    Hey Andrew, I do agree with you that there are many things that should be guaranteed to last the life of the vehicle (you used 50 years as an example), only real reason i see that companies do not do that is because they cant predict the driving style of every single person, many people are very hard on their vehicles which in turn reduces the lifespan of certain parts like brakes, transmissions, suspension, etc. So they dont do that because if they did, i could see many people who do not properly maintain their vehicles and who use their vehicles irresponsibly trying to take advantage of that "guarantee". thats just my thoughts though

  • RandyB143
    RandyB143Πριν μήνα

  • Mike Barbacovi
    Mike BarbacoviΠριν μήνα

    Why don’t you buy a new pickup. Or better still a contractor dump.

  • Andrew Camarata

    Andrew Camarata

    Πριν μήνα

    Pickups just rust out and dent up instantly. Its hard to justify spending money on that. Waiting to see the stainless steel tesla.

  • HR MacDonald
    HR MacDonaldΠριν μήνα

    Classic Andrew...excellent video Sir!

  • country flyer
    country flyerΠριν μήνα

    My electric brake controller is proporsional. The harder you press on the brakes the harder it brakes..

  • Constant Projects
    Constant ProjectsΠριν μήνα

    Learned about backing up a trailer with surge breaks today :) and I'm an engineer heh

  • Constant Projects
    Constant ProjectsΠριν μήνα

    Your new videos do look better :)

  • Doctored Claw
    Doctored ClawΠριν μήνα

    Cody has more mechanical aptitude than most dealership mechanics.

  • ian burit
    ian buritΠριν μήνα

    Hi young Andrew, like the little lathes, is the light grey one a Colchester Lathe, or a copy of one perhaps ? - As a young man many years ago I worked on one, good solid small lathe, originally made about 15 miles from where I now retired to, right on the coast of North Essex - UK.

  • ian burit
    ian buritΠριν μήνα

    Hi young Andrew - TOP TIP/ Adjusting your drum brakes ? drill a hole in the FRONT face of your brake drum, the suitable size for a rubber press fit bung to fit, then adjusting your drum brakes becomes easier on each wheel AFTER taking the wheel off first.. add some high temp grease/ spray silicone/ WD 40 onto the adjuster threads first/ thats my thoughts anyway/ have a good day.. thanks for the video / Ian -- UK.

  • PinkLady Bikermamma
    PinkLady BikermammaΠριν μήνα

    WHAT WAS THE NAME OF THE PART YOU INSTALLED TO DISENGAGE THE TRAILER BRAKES SO YOU CAN BACK UP? AT 37:49 MINUTES . I NEED ONE FOR OUR TRAILER. WE HAVE THE SAME PROBLEM. I TRIED TO FIND IT ON THE GOOGLE BUT DON'T HAVE THE NAME OF THE PART. SO IF YOU COULD PLEASE LET US KNOW WHAT IT'S CALLED. THANKS.

  • Chaplin
    ChaplinΠριν μήνα

    "I ordered this, a year ago!" lmao. Never in my life have I ordered a nice item and waited a year to get around to using it. That's when you know you're loaded/busy af

  • Daron Steele
    Daron SteeleΠριν μήνα

    I have same hammer it came with a vise.

  • Rena Burggraaf
    Rena BurggraafΠριν μήνα

    Not too many women watching this. But I can’t get enough. I do enjoy the excavator/dozer type work more than the mechanic stuff though.

  • excavator22
    excavator22Πριν μήνα

    Dare I say that Andrew could use a larger excavator and/or a rock crusher???

  • Jesse Dielschneider
    Jesse DielschneiderΠριν μήνα

    im surprised you didnt wire to the reverse lights on the truck

  • Jesse Dielschneider

    Jesse Dielschneider

    Πριν μήνα

    never mind

  • محمد الزهراني
    محمد الزهرانيΠριν μήνα

    يولد انت فنان

  • m hatori69
    m hatori69Πριν μήνα

    Was the home completed? Please introduce home

  • puncherdavis
    puncherdavisΠριν μήνα

    The brake actuation mechanism that brings the break into full motion are known to last between 65-85 years. ITS CALLED YOUR FOOT ,,,0..o

  • David
    DavidΠριν μήνα

    Just stumbled upon Andrew's channel... this guy is a STRAIGHT BOSS.... Shop, house, and work ethic GOALS. Keep it up man!

  • Andrew Camarata

    Andrew Camarata

    Πριν μήνα

    Thanks

  • Davidnumber23
    Davidnumber23Πριν μήνα

    thing is you wouldn't watch anyone else sorting trailer axles ...phenomena ✨😁

  • Brandon Diaz
    Brandon DiazΠριν μήνα

    Its so weird seeing you visit places that are local to me. I drive past that trailer shop all the time.

  • Andrew Camarata

    Andrew Camarata

    Πριν μήνα

    Neat

  • Zahid Khan
    Zahid KhanΠριν μήνα

    You do every maintenance before start the job very nice.

  • ThomasDiy
    ThomasDiyΠριν μήνα

    13:00 There probably mobile home axles off of a 14 x 70 or something. They cut them down to size and welded them back together to make a heavy equipment trailer. 23:00 The other thing about them old axles is our mobile home axles have never been modified and there made exactly the same. That cylinder is designed to to allow for the axles to flex. That way they don't just break in two under heavy loads.

  • Adam Imrie
    Adam ImrieΠριν μήνα

    Andrew Andrew Andrew...... MIG welding next to a machined surface without a fireproof blanket covering it to stop weld spatter! Not good. Overall a great job though👍👍

  • Banjo111 1
    Banjo111 1Πριν μήνα

    Oh My Gosh your a dare devil Andrew. My heart is up in my mouth when I watch you drive sometimes. lol take care from Australia

  • Carlos Gomez
    Carlos GomezΠριν μήνα

    Great video as always you never stop amazing us in your videos keep them coming Andrew 👍👍👍👍👍👍👏👏👏👏👏👏👏

  • Eric Martin
    Eric MartinΠριν μήνα

    Andrew, there is a “U” shaped section that you put between pointless the hook and trailer. What is happening is when you apply the brakes the the trailer pushes forward on the truck applying the brakes. When you back up the brakes are being applied. Downhill the trailer is pulled away from the truck and brakes aren’t being applied. Old school tech! Or use this: www.centrevilletrailer.com/surge-brake-actuator-repair-parts/3956-mcmaster-carr-manual-reverse-lockout-valve.html

  • Frederick Boyd
    Frederick BoydΠριν μήνα

    Andy you'll need to upgrade your overhead winch to electric someday,an your doors mate.

  • Buckhorncamp
    BuckhorncampΠριν μήνα

    Should have went with disk brakes with electric over hydraulic actuator. I changed out my boat trailer and it is is much better

  • James Feeney
    James FeeneyΠριν μήνα

    The more you own!!! The more you FIX!!!!!

  • rhbofwcc
    rhbofwccΠριν μήνα

    Most of those braking systems use to have some sort of locking mechanism for backing up.

  • Jack Pitstick
    Jack PitstickΠριν μήνα

    Is the dog the quality control manager? Either way himz doing a great job!

  • Eric Sanchez
    Eric SanchezΠριν μήνα

    💯💯🍺good wak today

  • Sjanzo
    SjanzoΠριν μήνα

    European surge brake manufacturers have a backmatic: if you reverse, the rear brake shoe is unwedged by its friction on the drum and gives way. It does need regular maintenance though, the Bowden cables need to be replaced every few years. But you buy a pair for under 30 bucks.

  • cody custer
    cody custerΠριν μήνα

    GOOD JOB

  • Paul Akers Jr
    Paul Akers JrΠριν μήνα

    13:57 Andrew goes for parts for the trailer, driver new parts home with the new trailer, that's what I was expecting.

  • Gr Vues
    Gr VuesΠριν μήνα

    23:47 , Andrew, u can order this one day grblock.info/for/b-nteo/q37dZsatm6BofZ0.html at 1:08 👍🏻😁

  • brian busboy
    brian busboyΠριν μήνα

    Unless you lock up the shoes during the adjustment process, you won't know for sure that both shoes are against the drum. Locking them up and then backing them off ensures that the brake shoes are centered in the drum. Also, a brake adjusting tool is worth it's weight in gold because it has a nice bend in it so you won't have to work around those u-bolts.

  • brian busboy
    brian busboyΠριν μήνα

    You don't have to drive the seals in until they stop. Flush with the hub works. A wood block will work as a stop.

  • shaun thornhill
    shaun thornhillΠριν μήνα

    “Parkour!!!”

  • Fine Line
    Fine LineΠριν μήνα

    Ease up on those seals, they just need to be flush with the lip of the drum. Also next time switch over to electric brakes. There way less problems than hydraulic.

  • David Quirk
    David QuirkΠριν μήνα

    Fully with you on the brake adjusters thing, auto adjusted ones fail too quickly but discs aren't the answer either; size of a disc brake is limited by wheel diameter but drums you can make wider to cope with large loads. Also, ignoring the adjuster issue, parking brakes on discs are pretty useless compared to drums a there's no self servoing action with a disc.

  • David Quirk
    David QuirkΠριν μήνα

    Is that a Colchester Lathe I see in your shop?

  • Bill Forse
    Bill ForseΠριν μήνα

    Love when your dog snuggles up to you

  • mostafa alnaeemi
    mostafa alnaeemiΠριν μήνα

    بكننبهفهلعععقصفلصفصضفضقضقضغصغص

Επόμενο